Home > Product Information > LED Controller>GL-CT-A-series

LED Controller

Mode: GL-CT-A-SERIES

Features

Working temperature:-20-60 degree

Working Voltage:DC12V/24V

Connection:Common Anode

Output:3-loops

Static Power consumption:<1W

Output current:<6A(per loop)

Output power: 12V<216W

Program table :

Mode	Effects	Mode	Flux(±5%)
1	Static white	12	Red/Green color jump
2	Static Red	13	Red/ Green gradually change
3	Static Green	14	Red/Blue jump
4	Static Blue	15	Red/Blue gradually change
5	Static Purple	16	Green/Blue jump
6	Static Yellow	17	Green/Blue gradually change
7	Static Sky blue	18	Single color chasing forward like flowing water
8	R/G/B single color jumps	19	Single color chasing reverse like flowing water
9	R/G/B single color gradually change	20	R/G/B single color jumping and strobing
10	Full colors Jump	21	Full colors jumping and strobing
11	Full colors gradually change

Dimension:

Connection Drawing :

Operating Instruction :

1. ON/OFF key ;

2. Pause Key;

3. Speed up;

4. Speed down

5. Increase the brightness;

6. Decrease the brightness;

7. Mode key( from single color changing mode to full color changing mode)

8.Opposite Mode key ( from full color changing mode to single color changing mode)

Note of LED Controller :

●　Installation, try to avoid the minefields, strong magnetic field and high-pressure region.

●　Ensuring a solid connection correctly in order to avoid short-circuit damage to components and trigger fires

●　12V / 24V LED Controller is installed in a well-ventilated place to ensure appropriate environmental temperature.

●　Using this product, please check the local voltage, power adapter is in line with product requirements, whether the definition of positive and negative power supply and product line

●　To prohibit the live wiring, check to confirm wiring is correct, check the no short-circuit, and then power.

●　In case of failures, do not maintenance in private.