Your Location:  Home > Product Information > Waterproof LED Strips > Color Temperature Adjustable Waterproof LED Strip

Color Temperature Adjustable 3528 Waterproof LED Strip

A type, waterproof with Silicone Tube IP67;
B type, waterproof with Silicone Glue IP68;
D type, waterproof with Heat-shrink tube IP68;
Non-waterproof style is available.

• Waterproof method :
• 
• Waterproof Material:
• Silicone hollow tube ,Silicone glue and Silicone transparence waterproof connector

• Features:
• Waterproof LED strips with Silicone material offers good heat/cold resistance, and not easy broken.
• 1.Anti-oxidation, anti-UV radiation and won‘t change color after long time use.
• 2.High flexibility ,high transparence, flame-proof and environmental friendliness.
• 3.Silicone material offers good heat or cold resistance and is not easily broken.
• 4.With silicone transparence waterproof connector can easily connect and totally waterproof .
• 5.With accessories to help strip easy installation, strip continuous connection and strip connection to LED drivers.
• 6.With 3M adhersive tape back,easy for installation;
• 7.Input Voltage DC12V or DC24V;6PCS LEDS per unit;
• 8.Can be in waterproof IP67,or waterproof in IP68.

Parameter:

The data above is under the test condition of Ta =25 degree ,DC 12V ,RH 85%

The data above is under the test condition of Ta =25 degree ,DC 12V ,RH 85%

• Dimension:
• 





• Accessories:
• 



• How to connect:
• 
• Cutting & welding waterproof LED strip, Please follow the steps: A1 A2 A3 B1 B2
• To cut and install waterproof connector at one end, please follow the steps: A1 A2 A3 C1 C2 C3 C4 C5
• A1 : Cut the light strip at the mark ”scissors” or by every 3 LED's.
• A2: Screw to open the glue cap.
• A3: Use the thrust (another side of glue cap ) to puncture the surface .
• B1: Inject the silicon gel into the end cap without holes .
• B2: Push the strip into the cap and let gel dry for 1 hour.
• C1: Put the connector wire through the end cap holes.
• C2: Solder the wire onto the PCB.
• C3: After solder the two wires, push the strip into the end cap with wires carefully.
• C4 : Inject the silicon glue at the end of strip and cap .
• C5: Make sure end cap and strip are connected well and let gel dry for 1 hour.

• Waterproof LED Strips Application :
• Cove lighting.
• Architectural light for canopy,corridor,window,archway;
• Backlight for edge lighting for signage.
• DIY lights for home use.
• Path and contour marking.
• Decorative lights for holiday,event,show exhibition.

• Features of A Type Waterproof led strip light series(Silicone Tube) :
• 1.Waterproof material: Silicone material which features anti-oxidation, anti-UV radiation, working temperature (-80~ 300 ℃), high flexibility, high transparence, flame-proof and environmental friendliness.
• 2.IP ratio: IP67 ;
• 3.Easy DIY waterproof process with waterproof accessories offered in free of charge.
• 4.This waterproof mode is available for the following series:
• a）3528 SMD LEDs Series
• b）5050 SMD LEDs Series
• 5. Standard Accessories per reel ( 5 meter )：a pair of waterproof connector , 1 pcs glue（10ML）,10 pcs clips, 20 pcs screw（if use 3M adhesive tape back ,we will not provide the clip and screw）, 4 pcs end cap ;

• Features of B Type Waterproof led strip light series(Silicone Glue) :
• 1. Waterproof material: silicone glue ,silicone U type groove.
• 2. Silicone material offers anti-oxidation, anti-UV radiation and won't change color.
• 3. Environmental friendliness.
• 4. Silicone material offers good heat or cold resistance and is not easily broken.
• 5. High transparent glue offers good strip light emitting performance and makes the light emitting loss less than 1%.
• 6. IP ratio: IP68;
• 7. not cutable.
• 8. Options to fix the waterproof strips:
• Option A: with 3M glue at the back of silicone tube;
• Option B: with silicone clips ;
• 9. Transparent waterproof connectors or non waterproof wires at one end or both ends of the waterproof strips.
• 10. This waterproof mode is available for the following series:
• a）3528 SMD LEDs Series
• b）5050 SMD LEDs Series
• 11. Standard Accessories per reel (5 M)： a pair of waterproof connector ,10 pcs clips

• Features of D type Waterproof led strip light series (Heat-shrink tube) :
• This product has the following features of unique structure, high-speed shrink, strong shrinkage force and good function to the climate. Colloid bearer is adopted to steel the commissure so that it can have a better effect to resist water and dampness. Hot melt- glue has a wide temperature-fitting range, no matter in a low temperature or a high one.
• 1.Temperature range:-55℃-125℃;70℃ in the beginning,full shrink temperature 110℃ with the super-thinned type,120℃ for the common full shrink temperature.
• 2.Flexible and anti-flaming.
• 3.Complete specifications, Φ0.6～ Φ180，and the special specification can also be made.
• 4.It’s convenient to use and it can be heated to shrink by using oven or heat gun.
• 5.It is fit for the standard of Sony and RoHs certificates in Europe.

• Waterproof LED Strips Notes :
• 1、Please make LED drivers compatible with flexible LED strips before use 3528 Waterproof LED strips.
• 2、To use LED strips 5M in serial, longer than 5M in parallel.
• 3、Before use,first check the power supply used in compliance with of the power requirements.
• 4、Each roll ask for independent power supply;not to use of multi-volume series use.